Philips 2006 Ultrasound IU22 Cable Jumper 453561233772 Rev A Used Part
Philips iU22 Ultrasound Internal System Component | Cable Jumper Interface | Model Number 453561233772 Rev A | Dedicated Internal Board-to-Board Signal/Power Bus Link | Reusable Diagnostic Imaging Capital Maintenance Element | Pre-Owned Medical Logistics Asset (1/EA)
The Philips 453561233772 Rev A is a professional-grade, internal system component expertly engineered to route, bridge, and maintain uninterrupted low-attenuation signal data and power distribution lines between primary circuit board architectures inside the Philips iU22 premium ultrasound platform. Manufactured during the 2006 hardware cycle, this specific Revision A internal jumper assembly links crucial processing blocks—such as the channel boards, front-end power grids, or backplane motherboard interfaces—ensuring clean telemetry communication without inductive crosstalk or timing delays. Operating within tight shielding parameters to suppress electromagnetic interference (EMI) that could corrupt sensitive micro-volt acoustic echo returns, this jumper cable features robust multi-pin connector housings fitted with active mechanical retention latches. These locks prevent the cable from backing out, rattling, or disconnecting over years of mechanical stress and mobile cart transportation across hospital floors. Forged from high-purity, insulated copper bundles inside a protective flexible sleeve, this refurbished biomedical component provides imaging engineers and field service technicians with a stable part certified to restore system communication faults, bus timeouts, and boot-sequence failures.
Technical Specifications
-
Philips Medical Part Number (12NC): 453561233772 (Explicitly tracked as 453561233772 Rev A)
-
Host System Architecture Match: Philips iU22 Intelligent Ultrasound Platform (2006 Vintage Era)
-
Hardware Revision Index: Revision A (Rev A)
-
Interconnect Functionality Profile: Multi-conductor internal board-to-board ribbon/wire jumper link
-
Signal Shielding Class: Integrated anti-static / EMI (Electromagnetic Interference) suppression wrap
-
Terminal Connection Types: Dual-ended multi-pin female terminal header sockets with manual lock-tabs
-
Material Composition Matrix: High-purity insulated copper cores wrapped in a flexible, thermal-resistant PVC or braided sleeve
More Images
Philips 2006 Ultrasound IU22 Cable Jumper 453561233772 Rev A Used Part
Philips iU22 Ultrasound Internal System Component | Cable Jumper Interface | Model Number 453561233772 Rev A | Dedicated Internal Board-to-Board Signal/Power Bus Link | Reusable Diagnostic Imaging Capital Maintenance Element | Pre-Owned Medical Logistics Asset (1/EA)
The Philips 453561233772 Rev A is a professional-grade, internal system component expertly engineered to route, bridge, and maintain uninterrupted low-attenuation signal data and power distribution lines between primary circuit board architectures inside the Philips iU22 premium ultrasound platform. Manufactured during the 2006 hardware cycle, this specific Revision A internal jumper assembly links crucial processing blocks—such as the channel boards, front-end power grids, or backplane motherboard interfaces—ensuring clean telemetry communication without inductive crosstalk or timing delays. Operating within tight shielding parameters to suppress electromagnetic interference (EMI) that could corrupt sensitive micro-volt acoustic echo returns, this jumper cable features robust multi-pin connector housings fitted with active mechanical retention latches. These locks prevent the cable from backing out, rattling, or disconnecting over years of mechanical stress and mobile cart transportation across hospital floors. Forged from high-purity, insulated copper bundles inside a protective flexible sleeve, this refurbished biomedical component provides imaging engineers and field service technicians with a stable part certified to restore system communication faults, bus timeouts, and boot-sequence failures.
Technical Specifications
-
Philips Medical Part Number (12NC): 453561233772 (Explicitly tracked as 453561233772 Rev A)
-
Host System Architecture Match: Philips iU22 Intelligent Ultrasound Platform (2006 Vintage Era)
-
Hardware Revision Index: Revision A (Rev A)
-
Interconnect Functionality Profile: Multi-conductor internal board-to-board ribbon/wire jumper link
-
Signal Shielding Class: Integrated anti-static / EMI (Electromagnetic Interference) suppression wrap
-
Terminal Connection Types: Dual-ended multi-pin female terminal header sockets with manual lock-tabs
-
Material Composition Matrix: High-purity insulated copper cores wrapped in a flexible, thermal-resistant PVC or braided sleeve
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Philips iU22 Ultrasound Internal System Component | Cable Jumper Interface | Model Number 453561233772 Rev A | Dedicated Internal Board-to-Board Signal/Power Bus Link | Reusable Diagnostic Imaging Capital Maintenance Element | Pre-Owned Medical Logistics Asset (1/EA)
The Philips 453561233772 Rev A is a professional-grade, internal system component expertly engineered to route, bridge, and maintain uninterrupted low-attenuation signal data and power distribution lines between primary circuit board architectures inside the Philips iU22 premium ultrasound platform. Manufactured during the 2006 hardware cycle, this specific Revision A internal jumper assembly links crucial processing blocks—such as the channel boards, front-end power grids, or backplane motherboard interfaces—ensuring clean telemetry communication without inductive crosstalk or timing delays. Operating within tight shielding parameters to suppress electromagnetic interference (EMI) that could corrupt sensitive micro-volt acoustic echo returns, this jumper cable features robust multi-pin connector housings fitted with active mechanical retention latches. These locks prevent the cable from backing out, rattling, or disconnecting over years of mechanical stress and mobile cart transportation across hospital floors. Forged from high-purity, insulated copper bundles inside a protective flexible sleeve, this refurbished biomedical component provides imaging engineers and field service technicians with a stable part certified to restore system communication faults, bus timeouts, and boot-sequence failures.
Technical Specifications
-
Philips Medical Part Number (12NC): 453561233772 (Explicitly tracked as 453561233772 Rev A)
-
Host System Architecture Match: Philips iU22 Intelligent Ultrasound Platform (2006 Vintage Era)
-
Hardware Revision Index: Revision A (Rev A)
-
Interconnect Functionality Profile: Multi-conductor internal board-to-board ribbon/wire jumper link
-
Signal Shielding Class: Integrated anti-static / EMI (Electromagnetic Interference) suppression wrap
-
Terminal Connection Types: Dual-ended multi-pin female terminal header sockets with manual lock-tabs
-
Material Composition Matrix: High-purity insulated copper cores wrapped in a flexible, thermal-resistant PVC or braided sleeve
